AER-9 Laser Rifle

This is an old project that’s finally getting it’s own page. A shame, because I feel like this was one of my best projects, too.

The AER-9 Laser Rifle from Fallout 3/New Vegas.

AER-9 - Profile

Inspired by the work Volpin had done on his Laser Rifle, I set to work on my own laser rifle back in 2010.

I started with making a rough-cut, Laser Rifle-shaped box out of 1/2″ MDF.

Slapped together AER-9

Top Down AER-9

More AER-9

Top of the AER-9

Obviously, this won’t work. So I had to next round the edges of the Laser Rifle, as well as add the front grip. The front section of the main barrel was also tapered inwards for vents.

All cleaned up!

Barrel close up

Butt-stock close up

And a nice first person shot.

First Person

Next came the primer and wet-sanding…

Primed

As well as a slot for the MFC catch.

Slot Detail

Raised sections were added for the flaring at the front/back. These were made of Sintra sheets.

Stuff

The rim of the buttstock is nailed-on styrene strips, giving the weapon a stamped metal feel.

Butt Stock Edging

While there were a few extra steps here, I’ve got no photos. The under-slung tube was lathed from a piece of wood, and the drop down at the front of the barrel was added.

Overshot

Fins were added to the back of the barrel in the control panel…

Control Panel (?)

And at the front of the muzzle.

Front Barrel

Raised sections were also added to the grip for depth.

Butt Stock again

After a second coat of grime, I attached a Micro Fusion Cell (lathed from a block of MDF) and the yellow laser sight cable to the top.

AER-9 - Profile

The new grime coat really helped make this weapon look complete.

AER-9 - Backside

If you look closely at the fins at the muzzle, it looks like they were welded on. This effect was achieved using hot melt glue.

AER-9 - Business End

AER-9 - Top

So there’s my AER-9 Laser Rifle. Took about two months total to complete.

AER-9 - Profile

More photos are available on my Flickr.

Advertisements

I’m Still Not Dead

Similar name to the last post, I know.

Anyone who has actually followed me, don’t worry, for I am still very much at work on my hobby and craft. I’ve just been under alot of pressure with my senior year and all.

It being my senior year, I needed to take some photos of my works for college portfolios. Here are a few!

Strider Diorama

AER-9 - Profile

DSCI0037

Ezio Auditore Vitruvian Man

Alyx's Gun - Left

EOD - Right

Mk-VI - Red (V5) Left

I’ll update as soon as I’ve got the time to put some meaningful work into my projects. Thanks for looking!

I’m Still Alive

But unfortunately, nothing in this post is about Portal or Portal 2. Sorry to you Google viewers.

Anyway, this post is merely a teaser of what posts I’m going to be writing up over the next month or so. The posts will contain detailed and in-depth descriptions of all the things I’m teasing here.My camera was also having problems, so a few photos aren’t too great. Sorry.

So let’s begin!

AER-9 Laser Rifle:
Fallout 3

Everyone who may have been following my work via Flickr may have seen that I have recently been working on the AER-9 Laser Rifle from Fallout 3. The deadline for this project hit way too soon for me, and thus it wasn’t finished 100%. Fortunately, I can still finish it, as it was only being submitted for judging at a local fair.

Overshot

Control Panel (?)

Front Barrel

Butt Stock again

Vault 101 Pressed Jumpsuit:
Fallout 3

This project was undertaken in two days. Pro-tip: Start a clothing project a minimum of a month in advance! This project had the same time constraints that the AER-9 did, and thus wasn’t fully finished either. But I still own it, and it will be completed in the coming weeks.

Vault 101 jumpsuit

101

Test-fitting

Front details

Strider Diorama
Half-Life 2

This project was my first attempt to see how well I can scratch build models, and I have to say I’m quite pleased with it. Strider is made from Styrene rods, clay, and resin, and the Overwatch soldiers are made from private military contractor 1/35th scale model pieces.

Diorama Complete

Overwatch Soldier 1

Overwatch Soldier Paint detail

Overwatch Soldier 2

Strider body

Alyx’s Gun
Half-Life 2

This is a birthday present for my girlfriend (who’s name, coincidentally, is Alyx), who wants to cosplay Alyx Vance sometime in the future.

Alyx's Gun

Barrel detail

AR-2
Half-Life 2

This was a prop that I’ve been wanting to do for a while, but has been shunted to the side multiple times because of the above projects. What you see below is everything I’ve done, which obviously isn’t very much.

AR-2

And that is it as far as my current projects go. I’ll be posting in depth updates, complete with better pictures, of each of these projects as I complete them, so stay tuned!